What does a 12 by 12 paver patio cost?

One national cost guide puts a 12 by 12 foot paver patio at $850 to $4,300. Its average for that size is about $2,600. A sloped lot or natural stone pushes the number up.

Is a paver patio more expensive than a concrete patio?

Yes, up front. National guides list plain poured concrete at about $4 to $12 per square foot installed. Pavers run about $8 to $25. One guide says pavers are easier to repair, since a sunken spot can be lifted and reset.

How deep should the base be under a paver patio?

The paver industry's trade association calls for at least 4 inches of compacted base on well drained soil. It says wet or weak soils in colder climates need more. Beckley's low hits freezing or colder on about 107 days a year. Ask each bidder to put the base depth in writing.

Does a sloped yard raise the cost of a paver patio?

Usually, yes. A level patio on a slope takes cutting or fill, and often a seating wall or steps. One national guide prices leveling or regrading a yard at $1,000 to $3,250.

Do you need a permit for a paver patio in Beckley?

Ask the City of Beckley Code Enforcement Office, which handles building and zoning questions inside the city. The Beckley Sanitary Board's erosion rules exempt minor work that disturbs no more than 500 square feet. A larger dig inside the Beckley watershed may need the Board's land disturbance application. In unincorporated Raleigh County, a retaining wall more than two feet above grade needs a county building permit.

How long does a paver patio take to install?

One national guide puts a 300 square foot paver patio at 35 to 40 hours of work. Slopes and rock add time, and so do walls. Your written estimate should say how long the job will run.

Is this what Veridian Corp charges?

No. These are market numbers from national cost guides, not our price list. We look at the job and put a free estimate in writing. Call or text (304) 237-1212 to get that written quote.

How Much Does a Paver Patio Cost in West Virginia?

National cost guides put a professionally installed paver patio at about $8 to $25 per square foot. One national guide that surveys its customers puts the average at $3,800 for a 280 square foot patio. Most of those homeowners spent between $2,400 and $7,000.

None of the national guides we checked publish a West Virginia paver price. These are market numbers, not our price list. Slopes and rock move the number on a southern West Virginia lot, and so does winter. A written paver patio installation quote prices the yard you actually have.

What do national cost guides list by patio size?

This table comes from that customer-survey guide, updated in June 2026.

Patio size	Area	Typical range	Average
10 by 10 feet	100 sq ft	$800 to $2,500	$1,800
12 by 12 feet	144 sq ft	$850 to $4,300	$2,600
12 by 16 feet	192 sq ft	$1,200 to $5,800	$3,500
16 by 16 feet	256 sq ft	$1,500 to $7,700	$4,600
16 by 20 feet	320 sq ft	$1,900 to $9,600	$5,700
18 by 24 feet	432 sq ft	$2,600 to $13,000	$7,800

Two other national guides land close by, at $8 to $24 and $10 to $25 per square foot. In the customer-survey guide, labor alone runs $4 to $11 per square foot, or $50 to $80 an hour. Sand and gravel for the base add about $1 per square foot in materials.

Why can a West Virginia patio price differ from the national average?

Federal wage data for May 2025 put West Virginia’s landscaping and groundskeeping workers at a median of $15.50 an hour. The national median was $18.82, and the Beckley metro area’s was $14.80. That gap can show up in the labor line of a quote.

One national guide says simple designs in lower cost areas land closer to $8 a square foot. A complex design or a higher cost area lands closer to $25.

The ground here can push a job the other way. Federal soil surveys map much of Beckley in rocky silt loam and loam over shale and sandstone. In the common plateau soils, that rock sits about three feet down. About 32 percent of the land inside the city maps on slopes of 15 percent or more.

Winter plays a part too. Federal climate normals put Beckley’s low at freezing or colder on about 107 days a year. Freeze and thaw is hard on a patio base that is too thin.

What drives the price of a paver patio?

Size sets the starting point. Bigger patios cost more in total, but often less per square foot. Simple rectangles cost the least to build.

The base. The paver industry’s trade association calls for at least 4 inches of compacted base on well drained soil. It adds that wet or weak soils in colder climates need a thicker base. The pavers then sit on about an inch of bedding sand. Ask every bidder how deep the base will be.

Slope and access. A level patio on a hillside lot takes cutting, fill or both. National guides say ground that is not level or easy to reach drives up labor. One guide prices leveling or regrading a yard at $1,000 to $3,250. A slope often calls for a seating wall or steps. Wall pricing is in our guide to what a retaining wall costs.

Pattern and borders. Curves and detailed patterns take more cutting and more labor time, national guides say. A contrasting border adds another row of pavers to set along the edge.

Material. Concrete pavers sit at the lower end of these ranges, and natural stone runs higher. One guide lists a natural stone patio at $15 to $35 per square foot. Another says flagstone can reach $50.

Tear-out. Removing an old concrete patio adds about $2 to $6 per square foot in one national guide.

A fire pit area. A built-in fire pit runs $300 to $1,400 in the customer-survey guide. It puts the low end on pits built along with the patio. Our fire pits and outdoor fireplaces page covers that work.

Drainage. Most patios get a slight slope so rain runs off, and that is part of the price. Beckley’s stormwater utility counts a patio as impervious surface. Rain runs off it instead of soaking in, so plan where that water goes.

The line items below come from 2025 and 2026 editions of national guides.

Line item	Published market range
Installed paver patio	$8 to $25 per sq ft
Labor alone	$4 to $11 per sq ft
Sand and gravel base materials	About $1 per sq ft
Leveling or regrading a yard	$1,000 to $3,250
Removing an old concrete patio	$2 to $6 per sq ft
Built-in fire pit	$300 to $1,400
Natural stone patio	$15 to $35 per sq ft
Plain poured concrete patio	$4 to $12 per sq ft

Is a paver patio worth it over plain concrete?

National guides list a plain poured concrete patio at about $4 to $12 per square foot installed. So a paver patio costs more up front. The guide behind that concrete figure lists a life of 30 to 50 years for plain concrete. It lists 25 to 75 years for pavers.

Another guide says pavers are easier to repair. The pavers over a sunken spot can be lifted and set back once the base is fixed. Plain concrete fits a simple slab where cost comes first. We also pour plain concrete patios and walkways.

What should a written paver patio estimate include?

Compare bids line by line, since two bids can price very different bases. A clear estimate spells out these items:

The patio’s size and shape
The paver and the pattern
Any border
The base depth and the stone used for it
The edge restraint that holds the pavers in place
How water will drain off the patio
Any seating walls or steps
Tear-out and hauling of old material

Before any digging, West Virginia law requires notice to West Virginia 811 at least 48 hours ahead. Weekends and holidays do not count. Inside Beckley, permit questions go to the City of Beckley Code Enforcement Office.

How do you get a price for your own paver patio?

We build paver patios across Beckley and southern West Virginia, base and edges included. Seating walls and steps can go in with the patio, and so can a fire pit area. Tell us the size you have in mind and where it goes. We look at the job and put a free estimate in writing, and financing is available. See how we build paver patios around Beckley, or call or text (304) 237-1212.